Protocol Control
System Administrator Guide
3-9
SNMP (Simple Network Management Protocol)
SNMP is a set of protocols designed to help manage complex networks. SNMP-compliant
devices store data about themselves in MIBs and return this data to the SNMP requesters. The
SNMP Configuration pages provide control over SNMP security, including methods to
configure:
■ Administrative and Key User accounts with privacy and authentication protocols and keys
associated with each account.
■ SNMP user account read or read/write access.
■ An access control list that limits SNMP access to the printer to specific hosts.
For information on configuring SNMP, see Configuring SNMP on page 4-17.
FTP (File Transfer Protocol)
FTP is a protocol for exchanging files over any network supporting the TCP/IP protocol, such
as the internet or an intranet. You can use FTP to send print-ready files to the printer or to
retrieve Job Accounting records from the printer.
To change FTP settings:
1. Launch your web browser.
2. Enter your printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4. Select the Protocols folder on the left navigation panel.
5. Select FTP.
6. If prompted, enter your Admin or Key User name and password.
7. Select On or Off in the FTP box.
8. If you selected On, follow the instructions on the page to select FTP settings. For more
information, including a description of the fields, click the Help button in CentreWare IS
to view the online help.
9. Click the Save Changes button.
Retrieving the Job Accounting file via HTTP or FTP
To access the job accounting file via FTP:
1. Connect to your printer via FTP using the following command FTP Printer_IP_Address.
2. Type get jobacct.log to retrieve the job accounting file.
Note: The files on the printer cannot be displayed using the dir/Iscommands
To access the job accounting file via HTTP:
1. Enter http://Printer_IP_Address/jobacct.dat in your web browser.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
