Phaser PJL Commands
System Administrator Guide
B-5
Phaser PJL Commands
The following table lists the most commonly used HP PJL and Xerox-unique PJL commands.
See also:
HP Printer Job Language Technical Reference for the standard set of PJL commands.
PJL Command Values Description
@PJL FSDELETE NAME=“pathname” * Deletes a file from the internal
hard drive.
@PJL FSDIRLIST NAME=“pathname” * Lists PJL system files and
directories.
@PJL FSDOWNLOAD FORMAT:BINARY
SIZE=size NAME=“pathname”
* Downloads a file to the internal
hard drive.
@PJL FSINIT VOLUME=value * Initializes the internal hard drive.
@PJL FSMKDIR NAME=“pathname” * Creates the specified directory
on the internal hard drive.
@PJL FSUPLOAD NAME=“pathname” * Uploads file from the printer to
the host.
@PJL USTATUS * Allows the printer to send
unsolicited status messages for
device status changes,
end-of-job status, and pages
printed. Status can be sent at
specified time intervals.
@PJL USTATUSOFF n/a Turns off all status responses.
@PJL FSAPPEND n/a Appends data to an existing file,
or if the file doesn’t exist, creates
the file and loads it with the given
data.
@PJL XCLIENTJOBID=value Exactly 48 bytes
(first byte is 8 and
the 8 last bytes
represent a time in
the format
hhmmsshs.
Sets the client job id used with
PrintingScout.
@PJL XJAFILENAME=“filename” Roman-8
characters
1-255
Sets the file name for Job
Accounting.
@PJL XJAHOSTNAME=“hostname” Roman-8
characters
1-255
Sets the host name for Job
Accounting.
@PJL XJAJOBNAME=“jobname” Roman-8
characters
1-255
Sets the job name for Job
Accounting.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
