Xerox Phaser 8560 System Administrator Guide

Basic Concepts
System Administrator Guide
4-4
If you want to use HTTPS, each printer must have a unique certificate that is accepted by each
browser used to access the printer. This allows the printer web server to use HTTPS and
encrypt data between the web browser and the printer. In addition, because each printer’s
certificate is unique, you must load a different certificate into the browser for each printer the
browser will access.
See also:
Self-Signed Certificates on page 4-3
Root-Signed Certificates
Root-signed certificates are from a trusted Certificate Authority (CA). Using a certificate
signed by a CA enables you to load one certificate into each browser, allowing access to all
printers. Certificates from a trusted third party are considered more secure than self-signed
certificates. Unlike self-signed certificates, root-signed certificates are not susceptible to
man-in-the-middle attacks.
See also:
Root-Signed Certificates on page 4-4
Managing Certificates on page 4-6
Configuring SSL on page 4-7
About Access Control Lists
Access control lists enable you to limit access to devices, as well as device configuration and
management features. By default, access control lists are unrestricted, which means all
computers and host systems are allowed access.
The printer has five access control lists that may be configured using CWIS:
■ Print Host Access List: The computers from which users can print. For information on
setting up the Print Host Access List, see Configuring the Print Host Access List on
page 4-9.
■ Color Access Control: A 4-digit numeric password is required in order for users to print
in color. Color access control is available on color printers only.
■ Administrator Access List: The computers from which you can change printer settings.
For information on setting up the Administrator Access List, see Configuring
Administrator and Key User Settings on page 4-8.
■ Key User Access List: The computers from which key users can change printer settings.
For information on setting up the Key User Access List, see Configuring Administrator
and Key User Settings on page 4-8.
■ SNMP Access List: The host machines that are authorized to access the printer using
SNMP. For information on setting up the SNMP Access List, see Configuring the SNMP
Access Control List on page 4-22.

Xerox Phaser 8560 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (color, normal)	5 s
Print speed (black, normal quality, A4/US Letter)	3 ppm
Print speed (color, normal quality, A4/US Letter)	30 ppm
Maximum internal memory	1 MB
Sound power level (standby)	33 dB
Sound pressure level (printing)	54 dB
Maximum duty cycle	85000 pages per month
Number of print cartridges	4
Page description languages	PCL 5c
Maximum input capacity	625 sheets
Paper tray 2 input capacity	525 sheets
Multi-Purpose tray input capacity	100 sheets
Power requirements	110 - 240 V, 50/60 Hz
Networking features	10/100BaseTX
Standard media sizes	140 x 216 mm - 216 x 356 mm
Power consumption (active)	230 W
Compatible operating systems	Linux, Mac OS X 10.2 +, Novell NetWare 3.x +, Windows 2000 +
Envelopes sizes	C5, DL
Maximum print size	216 x 356 mm
Paper tray media types	Bond paper, Envelopes, Glossy paper, Labels, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Supported network protocols (IPv4)	IPv6
Sustainability certificates	ENERGY STAR
Power consumption (PowerSave)	43 W
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	406 x 533.4 x 368 mm