Xerox Phaser 8560 System Administrator Guide

Configuring SNMP
System Administrator Guide
4-20
Configuring SNMP v3
When configuring SNMP v3, you can set up:
■ Administrative, Key, Any User, and Driver accounts with Privacy and Authentication Keys
associated with each account.
■ SNMP user read and write access.
■ An access control list that limits SNMP printer access to the specific hosts. See
Configuring the SNMP Access Control List on page 4-22.
To configure and enable SNMP v3:
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s Address field (http://xxx.xxx.xxx.xxx).
3. Click Properties.
4. Select the Protocols folder on the left navigation panel.
5. Select SNMP.
6. If prompted, enter your Admin or Key User name and password.
7. On the SNMP Configuration page, click the Configure SNMP v3 button.
8. Click the Configure Account(s) button. A series of pages display that enable you to
configure SNMP v3 and the Administrative User, Key User, and Any User/Driver
settings. The first page displays Administrative User account information after the account
has been created.
9. Do one of the following:
■ To create the Administrative User account and to enable SNMP v3, enter a user name
or accept the default name admin, and then click the Create button.
■ To configure the Key User and other account settings, click the Next button.
■ To delete the Administrative User account and disable SNMP v3, click the
Delete button. This also deletes all other accounts, including the Key User and Any
User settings.
The Administrative User Account Settings
■ User Name: The Administrative User account name defined on the Configure SNMP v3:
Administrative User Account page.
■ Authentication Protocols: The protocol associated with the Authentication Key; selected
on the Configure SNMP v3: Administrative User Account page.
■ Authentication Key: The Authentication Key defined on the Configure SNMP v3:
Administrative User Account page is displayed as a row of asterisks (*) here.
■ Privacy Protocol: The protocol associated with the Privacy Key; selected on the
Configure SNMP v3 Administrative User Account page.
■ Privacy Key: The Privacy Key defined on the Configure SNMP v3: Administrative
User Account page is displayed as a row of asterisks (*) here.
■ MIB Access: The Administrative User account's MIB access permissions, which are set to
Read/Write by default.

Xerox Phaser 8560 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (color, normal)	5 s
Print speed (black, normal quality, A4/US Letter)	3 ppm
Print speed (color, normal quality, A4/US Letter)	30 ppm
Maximum internal memory	1 MB
Sound power level (standby)	33 dB
Sound pressure level (printing)	54 dB
Maximum duty cycle	85000 pages per month
Number of print cartridges	4
Page description languages	PCL 5c
Maximum input capacity	625 sheets
Paper tray 2 input capacity	525 sheets
Multi-Purpose tray input capacity	100 sheets
Power requirements	110 - 240 V, 50/60 Hz
Networking features	10/100BaseTX
Standard media sizes	140 x 216 mm - 216 x 356 mm
Power consumption (active)	230 W
Compatible operating systems	Linux, Mac OS X 10.2 +, Novell NetWare 3.x +, Windows 2000 +
Envelopes sizes	C5, DL
Maximum print size	216 x 356 mm
Paper tray media types	Bond paper, Envelopes, Glossy paper, Labels, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Supported network protocols (IPv4)	IPv6
Sustainability certificates	ENERGY STAR
Power consumption (PowerSave)	43 W
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	406 x 533.4 x 368 mm