Xerox Phaser 8560 System Administrator Guide

Configuring SNMP
System Administrator Guide
4-19
Adding or Editing Traps for SNMP v1/v2c
To add or edit traps for SNMP v1v2c:
1. On the SNMP Configuration page: Click the Configure SNMP v1v2c button, and then
click the Configure Traps button.
The Configure Traps page lists the current Trap Destination Addresses for the SNMP
protocol.
■ The Address column lists the Trap Destination IP address or DNS Name.
■ The Ve rs ion/Typ e column lists the SNMP Trap version or Inform Request for sending
to the specified trap address. SNMP Trap versions include SNMP v1 Traps, SNMP
v2c Traps, and SNMP v2c Inform Requests.
■ The Traps column lists the types of traps to send to the Trap Destination Address.
Traps to be received include Printer Traps, Job Monitoring Traps, Cold Start, and
Authentication Traps.
2. Do one of the following:
■ To add traps for SNMP v1v2c, click the Add Destination button, and then go to
Step 3.
■ To edit the settings for a Trap Destination Address, click the corresponding
Edit button, and then go to Step 3.
■ To delete a Trap Destination Address, click the corresponding Delete button.
3. To add or edit a Trap Destination IP Address, click the IP Address radio button, and then
enter the IP Address in the fields.
4. To add or edit a Trap Destination DNS Name, click the DNS Name radio button, and then
enter the DNS Name in the field.
5. For a non-standard UDP port, enter the UDP Port Number in the field.
6. Select the SNMP trap version to send to the specified address. SNMP versions include
SNMP v1 Traps (default), SNMP v2c Traps, and SNMP v2c Inform Requests.
SNMP v1 Traps is the default.
7. Enter the community name of the destination device in the Community Name field.
8. For Traps to be received, select the check boxes of the different types of traps to send to
the specified address. Traps to be received include Printer Traps (default), Job Monitoring
Traps, Cold Start Traps, and Authentication Traps. At least one trap type must be selected.
9. Click the Apply button to save the changes.

Xerox Phaser 8560 Specifications

General

Color	Yes
Duplex printing	No
Print technology	Laser
Maximum resolution	2400 x 600 DPI
Time to first page (color, normal)	5 s
Print speed (black, normal quality, A4/US Letter)	3 ppm
Print speed (color, normal quality, A4/US Letter)	30 ppm
Maximum internal memory	1 MB
Sound power level (standby)	33 dB
Sound pressure level (printing)	54 dB
Maximum duty cycle	85000 pages per month
Number of print cartridges	4
Page description languages	PCL 5c
Maximum input capacity	625 sheets
Paper tray 2 input capacity	525 sheets
Multi-Purpose tray input capacity	100 sheets
Power requirements	110 - 240 V, 50/60 Hz
Networking features	10/100BaseTX
Standard media sizes	140 x 216 mm - 216 x 356 mm
Power consumption (active)	230 W
Compatible operating systems	Linux, Mac OS X 10.2 +, Novell NetWare 3.x +, Windows 2000 +
Envelopes sizes	C5, DL
Maximum print size	216 x 356 mm
Paper tray media types	Bond paper, Envelopes, Glossy paper, Labels, Plain paper, Recycled paper, Transparencies
Non-ISO print media sizes	Executive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Supported network protocols (IPv4)	IPv6
Sustainability certificates	ENERGY STAR
Power consumption (PowerSave)	43 W
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	406 x 533.4 x 368 mm