Phaser PJL Commands
System Administrator Guide
B-7
@PJL XPCLPAPERSRCx = yx is 0, 1, 2, 3, 4, 5,
6, 7, 8, 20, 21, 22,
23, which is the
number in the
<Esc>&l#H tray
selection
commands.
y is -1 for
AutoSelect, 0 for
the current tray
(eject page), 1 for
Tray 1, 2 for Tray 2,
etc., and 99 for the
factory defaults.
Overrides the tray selected in the
<Esc>&l#H PCL tray selection
commands.
* See the
HP Printer Job Language Technical Reference for the values.
PJL Command Values Description
To Next Page
Loading...
