4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface. This
procedure separates any sheets that are stuck together and reduces the possibility of jams.
5. Load the paper in the tray. Load hole-punched paper with the holes to the left.
• For 1-sided printing, load letterhead or pre-printed paper face up with the top edge going into the printer.
• For 2-sided printing, load letterhead and pre-printed paper face down with the top edge facing you.
108 Xerox
®
VersaLink
®
B400 Printer User Guide
Paper and Media
To Next Page
Loading...
