Xerox VersaLink B400 - Document Prints from Wrong Tray; Automatic 2-Sided Printing Problems; Printer Is Making Unusual Noises

DOCUMENT PRINTS FROM WRONG TRAY
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
Application and print driver have conflicting tray
selections.
1 Check the tray selected in the print driver.
2 Access the page setup or printer settings of the
application from which you are printing.
3 Set the paper source to match the tray selected in
the print driver or set the paper source to
AAuuttoommaattiiccaallllyy SSeelleecctt.
4 Check that you have the latest print driver installed.
For details, go to www.xerox.com/support/
VLB400support.
Note: To have the print driver select the tray, set
the tray used as the paper source to AAuuttoo
SSeelleeccttiioonn EEnnaabblleedd.
AUTOMATIC 2-SIDED PRINTING PROBLEMS
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
Unsupported or incorrect paper. Ensure that you are using a supported paper size and weight for 2-
sided printing. Envelopes, cardstock, and labels cannot be used for
2-sided printing. For details, refer to Supported Paper Types and
Weights for Automatic 2-Sided Printing.
Your printer model is not configured
with automatic 2-sided printing.
Ensure that your printer supports automatic 2-sided printing. For
details, refer to Printer Configurations and Options.
Incorrect setting. In the print driver Printing Options tab, select 22--SSiiddeedd PPrriinntt.
PRINTER IS MAKING UNUSUAL NOISES
PPRROOBBAABBLLEE CCAAUUSSEESS SSOOLLUUTTIIOONNSS
There is an obstruction or debris inside the printer. Power off the printer, then remove the obstruction
or debris. If you cannot remove the obstruction,
contact your Xerox representative.
Xerox
®
VersaLink
®
B400 Printer User Guide 139
Troubleshooting