Loading Paper
CHANGING PAPER SETTINGS
When you load paper into a tray, you can change the paper tray settings. The following options are available:
• FFuullllyy AAddjjuussttaabbllee: If you select this paper setting, you can change the paper size, type, and color when you load
paper into the tray.
• DDeeddiiccaatteedd: If you select this paper setting, you cannot change the paper size, type, and color when you load
paper into the tray.
• BByyppaassss: When paper is present in this tray, it is used for print jobs where you did not specify a particular tray.
For details about how to change the paper tray setting when loading paper in trays 1–4, refer to Loading Labels in
Trays 1-4. For details about how to change the paper setting when loading paper in the bypass tray, refer to
Loading Paper in the Bypass Tray.
LOADING PAPER IN TRAYS 1-4
You can adjust the length of the paper tray to accommodate A4, Letter (8.5 x 11 in.), and Legal (8.5 x 14 in.) paper
sizes.
Note: Trays 2–4 are optional.
To load paper in Trays 1–4:
1. To remove the tray from the printer, pull out the tray until it stops, lift the front of the tray slightly, then remove
it.
104 Xerox
®
VersaLink
®
B400 Printer User Guide
Paper and Media
To Next Page
Loading...
