3. Configure the tray.
• To compress the tray for shorter paper, hold the back of the tray with one hand. With the other hand, press
the release latch at the front of the tray, then push the ends inward until they latch.
• To extend the tray for longer paper, hold the back of the tray with one hand. With the other hand, press the
release latch at the front of the tray, then pull the ends outward until they latch.
To protect the paper when the tray is extended, place the paper cover over the extended section of the
paper tray.
4. Load paper into the tray before inserting it back into the printer. For details, refer to Loading Labels in Trays 1-4.
Xerox
®
VersaLink
®
B400 Printer User Guide 113
Paper and Media
To Next Page
Loading...
