IITTEEMM NNAAMMEE
DDEESSCCRRIIPPTTIIOONN
• When the printer is powered on, pressing this button displays a
menu on the control panel. From this menu, you can choose to
enter Sleep mode, restart, or power off the printer.
• When the printer is powered on, but in a low-power mode or
Sleep mode, pressing this button wakes the printer.
• When the printer is powered on, holding this button for 10-
seconds turns off the printer.
• This button also blinks to indicate the power status of the printer.
• When the light blinks slowly, the printer is in low-power mode or
Sleep mode.
• When the light blinks rapidly, the printer is powering down, or
exiting a low-power mode.
5 Status LED This light blinks blue or amber to indicate printer status.
BBlluuee
• Blinks blue once to acknowledge a successful Authentication
request.
• Blinks blue once slowly for a print job initiated at the control
panel.
• Blinks blue twice slowly for a print job received from the network.
• Blinks blue rapidly while the printer is powering up, or to signal
detection of a Wi-Fi Direct connection request.
AAmmbbeerr
• Blinks amber to indicate an error condition or warning that
requires your attention. For example, an out-of-toner condition, a
paper jam, or out of paper for the current job.
• It also blinks amber to indicate a system error, which typically is
associated with an error code.
6 Notification Banner Notifications and messages are displayed in a pop-up banner below
the apps area. To view the full notification, touch the down arrow.
Once you have reviewed the information, touch XX to close.
7 Pause Button When a job is being processed, a Pause icon appears in the
notification banner area. To pause the current job, touch the Pause
icon. The job pauses with the option to resume or delete the job.
22
Xerox
®
VersaLink
®
B400 Printer User Guide
Getting Started
To Next Page
Loading...
