Xerox VersaLink B7030 - Set Maximum Login Attempts; Set TLS; Set User Password Minimum Length

Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer
Security Function Supplementary Guide
16
37.
Select Close .
38.
Select Custom Permissions for Device Website Permissions.
39.
Select Setup .
40.
Select Jobs .
41.
Select Hide for Delete Jobs.
42.
Select Close .
43.
Select OK .
44.
On the Permission screen, select Roles .
45.
Select Printing User Roles .
46.
Select Edit for Basic Printing User.
47.
Select Custom Permissions .
48.
Disable Normal Print , Personal, Sample Set , Public Saved for Allowed Job Types.
49.
Select OK .
Set Maximum Login Attempts
Follow the procedure below to specify maximum login attempts.
1.
Select Permissions .
2.
Select Login/Logout Settings .
3.
Select Edit for Advanced Settings.
4.
Select Limit Login Attempts of System Administrator .
5.
Enable Limit Login Attempts of System Administrator .
6.
Enter 5 in Failed Login Attempt Limit.
7.
Select OK twice.
Set User Password Minimum Length
Follow the procedure below to specify the minimum number of digits allowed for a password.
This feature is only applicable to Local Authentication mode.
1.
Select Permissions .
2.
Select Password Rules .
3.
Enter 9 in Minimum Length.
4.
Select OK .
5.
Select Restart Later if prompted.
Set TLS
The Embedded Web Server requires TLS communication between a network connected computer
and the machine.
1.
Select System .
2.
Select Security .