Xerox VersaLink B7030 - Set CSRF; Set LDAP Server; Set User Role; Set WSD Scan

Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer
Security Function Supplementary Guide
19
5.
Select Restart Now if prompted.
Set WSD Scan
For the secure operation of the machine, follow the procedure below to set WSD Scan to Disabled .
1.
Select Connectivity .
2.
Select WSD (Web Services on Devices) .
3.
Disable WSD Scan
4.
Select OK .
5.
Select Restart Now if prompted.
Set CSRF
Follow the procedure below to configure the CSRF settings.
1.
Select Connectivity .
2.
Select HTTP .
3.
Enable CSRF Protection .
4.
Select OK .
5.
Select Restart Later if prompted.
Set LDAP Server
Configure the LDAP server settings for directory service.
1.
Select Connectivity .
2.
Select LDAP .
3.
Select LDAP Servers / Directory Services .
4.
Set Server Information and Advanced Settings.
5.
Select OK .
6.
Select Restart Later if prompted.
Set User Role
Configure the user role settings for network authentication mode.
1.
Select Permission .
2.
Select Roles .
3.
Select Setup LDAP Permissions Groups .
4.
Select LDAP .
5.
Select OK .
6.
Select Restart Now if prompted.
7.
On the Permission screen, select Roles .
8.
Select Edit LDAP Groups .
9.
Select + .
10.
Enter an administrator group.