Xerox VersaLink B7030 - Security Features; Settings for the Secure Operation

Xerox
®
VersaLink
®
B7025/B7030/B7035 Multifunction Printer
Security Function Supplementary Guide
6
 If you have such inquiries as the following, please contact us (www.xerox.com/support):
- Inquiries about the machine's functions
-
All other inquiries.
 This manual has been prepared on the assumption that the security functions, fax function are available. If your
model provides the said functions as optional ones, you need to purchase and install Optional Kit.
HDD Model requires Hard Disk Drive, if your model provides as optional one, you need to purchase and install
Hard Disk Drive.
You can check whether your model has the said functions by checking whether icons for the functions appear on
the control panel or by checking Configuration Report.
 You can identify the product codes for the models and the expected options in the List of Product Codes in
"Appendix".
Security Features
The machine has the following security features:
 Hard Disk Data Overwrite (HDD Model)
 Hard Disk Data Encryption (HDD Model)
 Flash Memory Encryption (Diskless Model)
 User Authentication
 System Administrator’s Security Management
 Customer Engineer Operation Restriction
 Security Audit Log
 Internal Network data protection
 Self Test
 Information Flow Security / Fax Flow Security
Settings for the Secure Operation
For the effective use of the security features, the System Administrator (Machine Administrator)
must configure settings by referring to the following sections.
 Settings for the Secure Operation (Initial Settings Procedures Using Embedded Web Server)
 Settings for the Secure Operation (Initial Settings Procedures Using Control Panel)
 Regular Review by Audit Log
 Self Testing
 Authentication for the secure operation
 Operation using Control Panel
 Operation using Embedded Web Server