9. On the sample pages, for Side 1, use a ruler to measure the distance of the printed image from
the top, bottom, left, and right edges.
Note: For identification, a dot is printed on the bottom of the page. A single dot is
printed on Side 1, and two dots are printed on Side 2.
10. For Side 2, measure the distance of the printed image from the top, bottom, left, and right edges.
11. If the image is centered, no adjustment is required. If the image is not centered, adjust the paper
registration. For more information, refer to Performing a Paper Registration Adjustment.
PPeerrffoorrmmiinngg aa PPaappeerr RReeggiissttrraattiioonn AAddjjuussttmmeenntt
1. At the printer control panel, press the Home button.
2. Log in as administrator. For details, refer to the System Administrator Guide at www.xerox.com/
support/VLC8000docs or www.xerox.com/support/VLC9000docs.
3. Touch Device→Support→Image Position.
4. To adjust registration, select the source paper tray.
a. Touch Paper Supply.
b. Touch the desired tray.
5. Use the chart that you printed in Verifying Paper Registration, then select the side for registration.
• To adjust Side 1, touch Adjusted Side, then touch Side 1.
• To adjust Side 2, touch Adjusted Side, then touch Side 2.
6. To adjust the registration, touch Lead/Side Registration.
• To adjust the side-to-side registration, for Side Registration, touch the Plus icon (+) or the Minus
icon (-).
• To adjust the top-to-bottom registration, for Lead Registration, touch the Plus icon (+) or the
Minus icon (-).For reference, position the chart so that Side-1 or Side-2 dots are at the bottom
of the page.
– For Lead Registration, a positive value shifts the image down the page.
– For Side Registration, a positive value shifts the image to the left.
7. To save your settings, touch OK→Adjust.
8. As needed, to enter more values, repeat the previous steps.
9. Print another sample page, then repeat the process until you complete the registration
corrections.
10. To return to the Home screen, press the Home button.
Xerox
®
VersaLink
®
C8000/C9000 Color Printer
User Guide
153
Maintenance