Xerox VersaLink C9000

5. Remove the jammed staples.
WARNING: The points of the jammed staples are sharp. Remove the jammed staples
carefully.
6. To close the staple clamp, push the clamp in the direction shown until it snaps into the locked
position.
7. Grasp the new staple cartridge by the orange handle, then insert the cartridge into the stapler
assembly until it clicks.
8. Return the staple cartridge assembly to its original position, then close the finisher door.
210
Xerox
®
VersaLink
®
C8000/C9000 Color Printer
User Guide
Troubleshooting