Xerox Versant 2100 Press - Page 7

Product Overview Xerox
®
Versant™ 2100 Press
Customer Expectation and Installation Guide Xerox Confidential 2
Finishing
Offset Catch
T
r
a
y
(OCT)
Holds a maximum of 500 sheets
Interface Module
The Interface Module acts as a paper path from
the press to the finishing device; it also allows
communication between the press and the
finishing device. The Interface Module also
cools and decurls paper as it exits the press and
before it enters the finishing device.
The Interface Module is required with any
system configuration that has one or more
finishing device, except the Offset Catch Tray
(OCT).
GBC
®
AdvancedPunch
®
Pro
The GBC AdvancedPunch Pro is an inline die
punch that utilizes modular die sets to enable a
variety of hole- punch patterns from A4/8.5 x 11
in. (LTR/letter) Long- Edge-Feed (LEF) to 12x18
or SRA3 media. LTR die punch ships with 19-
hole die set; A4 die punch ships with 21-hole die
set.
High Capacity
Stacker (HCS)
The HCS is designed for long production runs:
 Top tray has a maximum 500 sheet capacity.
 Stacking a maximum of 5,000 sheets (based
on 80 gsm centerline paper) and offsetting
the output in the stack tray/cart
 The movable stack tray/cart provides easy
transition of the output to off-line finishing
 An additional stack tray/cart is available for
the customer to order
 Sample prints are additional prints that are
directed to the top tray for inspection.
Sample prints are not produced by redirecting
sheets from the stack tray/cart to the top
tray; therefore the contents in the stack
tray/cart are complete
 Two High Capacity Stackers may be chained
together for additional stacking capacity
Standard Finisher
The Standard Finisher features include a basic
in- line punch, stapler, the stacker tray, and top
exit tray. It also includes a built-in interposer
(inserter) and a built-in decurler unit that
corrects the curl on paper output from the print
engine.
An optional C/Z Folder is available which
includes the C-Fold, Z-Fold, and Z-Fold Half
Sheet. Refer to C/Z Folder for more information.
Booklet Maker
Finisher
The Booklet Maker Finisher features include a
basic in-line punch, stapler, the stacker tray, top
exit tray, and a booklet unit capable of saddle
stapling and bi-fold. It also includes a built-in
decurler unit that corrects the curl on paper
output from the print engine and a built-in
interposer (inserter) that feeds cover paper to
the finisher for saddle-staple operation.
An optional C/Z Folder is available which
includes the C-Fold, Z-Fold, and Z-Fold Half
Sheet. Refer to C/Z Folder for more information.
Standard Finisher
Plus
The Standard Finisher Plus includes the
functionality of the Standard Finisher and adds
interface/trans- port module to enable
connection to third party finishing solutions.
An optional C/Z Folder is available which
includes the C-Fold, Z-Fold, and Z-Fold Half
Sheet. Refer to C/Z Folder for more information.