June 2014
2-9
Xerox® WorkCentre® 3025 Multifunction Printer Service Manual
09-450 , 09-550
Status Indicator RAPs
09-450 Print Cartridge At End of Life Fault
The Print Cartridge is empty.
BSD-Reference: None
Procedure
Switch Off the power and replace the Print Cartridge.
09-550 Print Cartridge Undetected Fault
The Print cartridge has not been installed or machine software is unable to detect the Print
Cartridge.
BSD-Reference: None
Initial Actions
Ensure that the Print Cartridge has been installed and the cover is fully closed and latched.
Procedure
1. Switch Off the power.
2. Remove the Print cartridge. Rotate the cartridge five to six rotations to distribute the toner
evenly.
3. Check the CRUM contact area for contamination and clean if necessary.
4. Reinstall the Print Cartridge.
5. If the problem continues, install a new Print Cartridge.
To Next Page
Loading...
