Installation and Setup
62 Xerox
®
WorkCentre
®
6025 Multifunction Printer
User Guide
Setting Up Scanning to an FTP Server
Before you set up scanning to an FTP Server, the server must have the proper software installed and be
configured with shared folders for each user.
1. At your computer, open a Web browser, in the address field, type the IP address of the printer, then
press Enter or Return.
Note: If you do not know the IP address of your printer, see Finding the IP Address of Your Printer
on page 27.
2. In CentreWare Internet Services, click Address Book.
3. Under Network Scan (Comp./Serv.), click Computer/Server Address Book.
4. Next to any empty field, click Add.
5. Enter the name to display in the address book.
6. For Network Type, select Server (FTP).
7. For Host Address, type the IP address or DNS name for the server.
8. For Port Number, enter the default port number, or select a number from the range provided.
9. For Login Name, type a login name for the FTP server.
10. Type and confirm the password for the FTP server.
11. For Name of Shared Directory, type the name of the destination folder on the FTP server. For
example, to save scanned files to a shared folder named scans, type scans.
12. For Subdirectory path, type the path of the folder as needed. For example, to save scans to a folder
called colorscans that is one level below the scans folder, type /colorscans.
13. Click Save Changes. A new address book entry is created.
To Next Page
Loading...
Need help?
General
