Installation and Setup
48 Xerox
®
WorkCentre
®
6025 Multifunction Printer
User Guide
Configuring General Setup Using the Control
Panel
This section includes:
• Accessing Information About the Printer Using the Control Panel ................................................................ 48
• Using the Power On Wizard ............................................................................................................................................. 48
• Configuring System Settings ........................................................................................................................................... 49
•
Setting the Paper Size and Type ................................................................................................................................... 51
Accessing Information About the Printer Using the Control Panel
You can view information about the printer on the information pages.
1. On the printer control panel, press the System button.
2. Navigate to Information Pages, then press OK.
3. Navigate to the desired report, then press OK.
Using the Power On Wizard
The Power On Wizard helps to configure several preliminary settings for the printer, including the
country, date, time, and time zone.
To use the Power On Wizard to set up the printer:
1. On the printer control panel, press the System button.
2. Use the Up and Down arrows to navigate to Admin Menu, then press OK.
3. Navigate to System Settings, then press OK.
4. To navigate to the Power On Wizard, use the Up or Down arrows, then select Power On Wizard.
5. Select Yes, then press OK.
6. Complete the steps in the wizard, then press OK.
To Next Page
Loading...
Need help?
General
