Xerox WorkCentre 6025 User Manual

Troubleshooting
Xerox
®
WorkCentre
®
6025 Multifunction Printer 155
User Guide
Label and Envelope Misfeeds
Probable Causes Solutions
The label sheet is facing the wrong way in the
tray.
• Load label sheets according to the instructions from the
manufacturer. Load labels face up in either tray.
Envelopes are loaded incorrectly.
• Load No. 10, DL, and Monarch envelopes in the trays with the
print side up, flaps closed, flap-side down, and the short edge
leading into the printer.
• Load C5 envelopes with the print side up, flaps open and facing
away from the printer.
No. 10, DL, and Monarch envelopes are
wrinkling.
To prevent wrinkling on No. 10, DL, C5, or Monarch envelopes, load
them print side up, flaps open and facing away from the printer.
Note: When you load envelopes long-edge feed, ensure that you
specify landscape orientation in the print driver.
Paper Jam Message Stays On
Probable Causes Solutions
Some paper remains jammed in the printer. Recheck the media path and ensure that you have removed all of
the jammed paper.
Check for, and remove, torn pieces of paper in the paper path.
One of the printer doors is open. Check the doors on the printer and close any door that is open.
The rear door interlock switch is not reset. To reset the interlock switch and clear the paper jam message, open
and close the back door.

Xerox WorkCentre 6025 Specifications

General

Print Technology	Laser
Print Speed Color	10 ppm
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	150 sheets
Monthly Duty Cycle	30, 000 pages
Dimensions	410 x 389 x 318 mm
Functions	Print, Copy, Scan
Duplex Printing	Manual
Scanner Type	Flatbed
Copy Speed Color	10 cpm
Copy Resolution	600 x 600 dpi
Connectivity	USB, Wi-Fi
Paper Size	Letter, Legal, A4
Mobile Printing	Apple AirPrint, Google Cloud Print