Xerox WorkCentre 6025 User Manual

Paper and Media
Xerox
®
WorkCentre
®
6025 Multifunction Printer 79
User Guide
Printing on Glossy Cardstock
You can print on Lightweight Glossy Cardstock that is 163 g/m² or less.
• Do not open sealed packages of glossy cardstock until you are ready to load them into the printer.
• Leave glossy cardstock in the original wrapper, and leave the packages in the shipping carton until
ready to use.
• Remove all other paper from the tray before loading glossy cardstock.
• Load only the amount of glossy cardstock you are planning to use. Do not leave glossy cardstock in
the tray when you are finished printing. Replace unused cardstock in the original wrapper and seal.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy cardstock to
curl and jam in the printer.
• In the print driver software, select the desired glossy cardstock type or select the tray loaded with
the desired paper.
To optimize printing on glossy cardstock, do one or more of the following:
• Adjust the paper type setting. For details, see Adjusting Paper Type on page 132.
• Adjust the bias transfer roller. For details, see Adjusting the Bias Transfer Roller on page 132.
• Adjust the fuser. For details, see Adjusting the Fuser on page 133.

Xerox WorkCentre 6025 Specifications

General

Print Technology	Laser
Print Speed Color	10 ppm
Print Resolution	1200 x 2400 dpi
Scan Resolution	600 x 600 dpi
Paper Capacity	150 sheets
Monthly Duty Cycle	30, 000 pages
Dimensions	410 x 389 x 318 mm
Functions	Print, Copy, Scan
Duplex Printing	Manual
Scanner Type	Flatbed
Copy Speed Color	10 cpm
Copy Resolution	600 x 600 dpi
Connectivity	USB, Wi-Fi
Paper Size	Letter, Legal, A4
Mobile Printing	Apple AirPrint, Google Cloud Print