Xerox WorkCentre 7220 System Administrator Guide

Printing
126 WorkCentre 7800 Series Multifunction Printer
System Administrator Guide
Restoring Saved Jobs from an FTP Repository
1. In CentreWare Internet Services, click Properties > Services > Print From.
2. Click Reprint Saved Jobs > Restore Jobs.
3. Under Settings, select FTP as the protocol.
4. Select the address type and Port for the FTP server where the saved jobs are stored. Options are
IPv4 Address, IPv6 Address, or Host Name.
5. Type the appropriately formatted address in the IP Address: Port field. The default port number
is 21.
6. Type the path to the file repository in the Document Path field.
7. Type the name for the backup file that you want to restore In the File Name field. This name is
appended to the end of the document path.
8. Type the login name of the FTP server In the Login Name field.
9. Type and retype a Password.
10. Enable Select to Save New Password.
11. Click Start to begin restoring Saved Jobs or Undo to retain the previous settings.
CAUTION: When you restore backed-up jobs, existing stored jobs are overwritten, and the Default
Public Folder is emptied.

Xerox WorkCentre 7220 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Color Output	Color
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Paper Capacity	1, 090 sheets
Duplex Printing	Yes
Memory	2 GB
Hard Drive	160 GB
ADF Capacity	50 sheets
Type	All-in-One
Print Speed	20 ppm
Copy Speed	20 cpm
Connectivity	USB 2.0, Ethernet
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux