Xerox WorkCentre 7220 System Administrator Guide

Customization and Expansion
WorkCentre 7800 Series Multifunction Printer 245
System Administrator Guide
Auxiliary Interface Kit
An Auxiliary Interface Kit, or a Foreign Device Interface Kit, is a third-party access and accounting device.
These kits, such as a coin operated printer accessory or a card reader, can be attached to the printer.
Installation instructions are included with the Foreign Device Interface Kit.
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
2. Touch Accounting Settings.
3. Touch Accounting Mode > Auxiliary Access.
4. Touch Auxiliary Device Type and select your printer type.
5. Touch Save twice.
See also:
Accounting on page 199
Local Authentication on page 68

Xerox WorkCentre 7220 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Color Output	Color
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Paper Capacity	1, 090 sheets
Duplex Printing	Yes
Memory	2 GB
Hard Drive	160 GB
ADF Capacity	50 sheets
Type	All-in-One
Print Speed	20 ppm
Copy Speed	20 cpm
Connectivity	USB 2.0, Ethernet
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux