Xerox WorkCentre 7220 System Administrator Guide

Printing
128 WorkCentre 7800 Series Multifunction Printer
System Administrator Guide
Configuring General Print Settings
1. In CentreWare Internet Services, click Properties > Services.
2. Click Printing > General.
3. To print a Configuration Report when the printer is turned on, under Configuration Report, select
Print at Power on.
4. To restrict printing of the Configuration Report and Information Pages to the system administrator,
under Configuration/Information Pages Report, select Restrict to SA.
5. To set the time that the printer holds print jobs before deleting them, under Delete Held Jobs After,
enter the time in minutes.
6. Click Apply.

Xerox WorkCentre 7220 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Color Output	Color
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Paper Capacity	1, 090 sheets
Duplex Printing	Yes
Memory	2 GB
Hard Drive	160 GB
ADF Capacity	50 sheets
Type	All-in-One
Print Speed	20 ppm
Copy Speed	20 cpm
Connectivity	USB 2.0, Ethernet
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux