Xerox WorkCentre 7220 System Administrator Guide

Scanning
WorkCentre 7800 Series Multifunction Printer 175
System Administrator Guide
Configuring Scan To Destination
The Scan To Destination feature allows you to associate scan destinations with address book contacts.
Users can select these contacts when scanning using the Scan To feature.
Before You Begin
• Add at least one contact to the Device Address Book.
• Add scan destinations to address book contacts.
For details, see Address Books on page 227.
Configuring Default Scan Settings
1. In CentreWare Internet Services, click Properties > Services.
2. Click Scan To > Setup.
3. Edit settings as needed. For details, see the Help in CentreWare Internet Services.
Setting the Default Scan To View to Favorites
1. In CentreWare Internet Services, click Properties > Services.
2. Click Scan To > Setup.
3. Click Address Book.
4. To configure the Device Address Book settings stored in the printer, click Edit.
5. To set the default Scan To view at the control panel as Favorites, under Policies, select View
Favorites on Scan To Service Entry.
6. Click Apply.

Xerox WorkCentre 7220 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	Laser
Color Output	Color
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Fax Speed	33.6 Kbps
Standard Paper Capacity	1, 090 sheets
Duplex Printing	Yes
Memory	2 GB
Hard Drive	160 GB
ADF Capacity	50 sheets
Type	All-in-One
Print Speed	20 ppm
Copy Speed	20 cpm
Connectivity	USB 2.0, Ethernet
Network Connectivity	Ethernet
Operating System Compatibility	Windows, Mac, Linux