120
7. Select Close repeatedly until the System Settings screen (with an Exit button) is displayed.
8. Select Exit.
9. After the machine is restarted, print a settings list to confirm that each item is configured.
For information on how to print a settings list, refer to the Settings List topic in the Network
Connectivity section of this guide.
10. Test the E-mail transmission from the machine by pressing the All Services button, then touching
the on-screen E-mail button, then the Keyboard button. Type in your E-mail address, then press
Close. Place a document in the document handler and press the large, green, Start button, located
to the immediate right of the Control Panel’s numeric keypad.
To Next Page
Loading...
