293
3. Check to see if a lack of available Novell Licenses is Preventing the Printer from Logging In
Performed by a QUALIFIED NETWORK ADMINISTRATOR at the Server Console, with monitor.nlm
running, type version to display the number of user licenses installed. For comparison, from the
“NetWare 4.x Console Monitor,” in the “General Information” window, the total number of licenses in
use is displayed.
4. Print a Test File using NPRINT
At the client workstation, with an appropriate print file (mydraw.ps, for example) in the boot drive of
the workstation, change to the boot drive (by typing C: if necessary), and type the following TYPICAL
nprint command. If the Server’s set up is correct, the file should print.
C:\>NPRINT MYDRAW.PS /Q=8830_Q1 /NOBANNER
Note: 1) mydraw.ps is just a file example. Substitute your own file for this one. 2) Q= your printer
queue. 3) Insert a space after nprint and before all forward slash marks (/) of this command.
To Next Page
Loading...
Need help?
General
