FusionServer 2288H V6 Server
Technical White Paper
Activity Indicator
(Green)
The drive is being located.
Data on the secondary drive is being rebuilt.
A drive in a RAID array is removed.
NVMe Drive Indicators
Figure 5-71 NVMe drive indicators
⚫
If the VMD function is enabled and the latest VMD driver is installed, the NVMe drives
support surprise hot swap.
Table 5-42 NVMe drive indicators (VMD enabled)
Activity Indicator
(Green)
The NVMe drive is not detected.
The NVMe drive is detected and operating
properly.
Data is being read from or written to the
NVMe drive.
The NVMe drive is being located.
The data on the secondary NVMe drive is
being rebuilt.
The NVMe drive is faulty.
⚫
If the VMD function is disabled, NVMe drives support only orderly hot swap.
To Next Page
Loading...
