Appendix F. Configuring Dual Mode Tablet Digitizer Input Methods
Sample implementations
iX104C
4
User’s Handbook 127
■ The user can temporarily change the digitizer input control
settings.
■ The user can change the default digitizer input control settings.
Configure settings as follows:
1. Do not use the BIOS Setup Utility to set a Supervisor password.
2. Use the Panel Control Center to set one of the P keys to Digitizer
Selection.
3. Use the Add new user function to create a user account.
Note: If the user already exists, the setting the administrator has
set replicates to all the users of the computer.
To Next Page
Loading...
