Xplore iX104C3 - Resuming Operation

Chapter 2. Using the iX104C3
Suspending and resuming operation
iX104C
3
User’s Handbook 31
Resuming operation
To resume operation when the computer is in Suspend mode, press
the
Power On/Off/Suspend/Resume button.
Note: Press the button only once.
After a minute or two, the computer resumes normal operation. When
the Status LED displays a continuous green light, you can begin using
the computer.
Note: Resuming operation from Hibernation mode takes a little
longer than from Suspend-to-RAM mode.
Power On/Off/
Suspend/Resume
button