Chapter 2. Using the iX104C3
Connecting devices
iX104C
3
User’s Handbook 43
2. If the Mute check box is checked, uncheck it.
3. Move the slider bar up or down to increase or decrease the
volume.
Connecting a monitor or projection panel
Activating the monitor or projection panel
To change the video output to the monitor or projection
panel:
Press the Fn-P1 key combination.
To change the video output back to the computer:
Press the Fn-P1 key combination again.
Connecting an XPL snap-on expansion module
Monitor/projection
panel connector
XPL expansion port
To Next Page
Loading...
