Xplore iX104C3 - Selecting Auto-Sense, Active, or Touch Mode

Chapter 2. Using the iX104C3
Using the pen
iX104C
3
User’s Handbook 33
Selecting Auto-Sense, Active, or Touch mode
If your computer is the iX104C
3
Dual Mode model, use the Fn-P2
key combination to select Auto-Sense mode (the default mode),
Active-only mode, or Touch-only mode.
In Auto-Sense mode, you can use the multi-function pen provided
with the tablet, your finger, or any other similar pointing device
interchangeably, on the fly.
In Active mode, you can use only the special multi-function pen
provided with the tablet.
In Touch mode, you can use your finger or another similar pointing
device.
Note: The input methods available to you depend on the way
your tablet has been configured. See Appendix F, "Configuring
Dual Mode Tablet Digitizer Input Methods.”