To Next Page

To Previous Page

Auto Pause

___________________________________________________________________________________________________________________________

This function will automatically

deduct rest or stop time when you

are riding, by default, this function

will automatically activate when the

speed is less than 2 km/hr. When the

speed is returned to higher than 2

km/h, the recording will continue

automatically. Using this function, it is

not necessary to pause manually in

order to keep an accurate record.

Select [Auto Pause] to configure the

setting.

* Note: Input "0" to disable the

function.

Record Auto Upload

____________________________________________________________________________________________________________________________

This function will automatically upload the current riding record to the cloud

storage when the recording is ended after you have completed the ride,

without interfered by pop up upload inquiry window to ensure real time data

security. Set the Auto Activity Upload switch to ON to enable this function.

* Note: Requires Wi-Fi or 3G connection to be uploaded automatically. If the

internet connection is not available when the recording is ended, the record will

be kept in the device.

* Note: Due to safeguard privacy and data security, when the recording is

automatically uploaded, the default privacy is set to [only you]. To change the

setting to public viewing, you have to manually change the setting in Privacy

Setting.

* Note: Once this function is enabled, those previous recorded files will not be

uploaded to the cloud storage and they will remain stored in the device.

Xplova X5 User Manual

Questions and Answers: