What to do if my Xpresskit Extender ISO 1 is not detected?
If the Xpresskit Extender displays 'ISO 1 not detected', the Yellow/Black wire did not detect the expected signal. Refer to 'Installation (wiring diagrams & vehicle wiring reference charts)' to check the connections.
What to do if Xpresskit Extender CAN bus incorrectly detected?
If the Xpresskit Extender displays 'CAN bus incorrectly detected', verify the CAN1 and CAN2 connections. Refer to 'Installation (wiring diagrams & vehicle wiring reference charts)' to check the connections.
Why is my Xpresskit Extender showing OEM RS disabled?
If the Xpresskit Extender displays 'OEM RS disabled', the factory remote start option is disabled. Refer to the vehicle's owner manual to reactivate the factory remote starter.
Why Xpresskit Extender shows Runsafe was not disabled?
If the Xpresskit Extender displays 'Runsafe was not disabled', no UNLOCK command was received prior to opening the door, or the 45 second timer expired in takeover mode.
Why Xpresskit Extender shows RFTD disabled?
If the Xpresskit Extender displays 'RFTD disabled', OEM Remote Start Activation was attempted while the RFTD feature is disabled. Make sure RXT is selected from the web in the flashing process.
What to do if Xpresskit Extender is waiting to begin the programming sequence?
If the Xpresskit Extender displays 'Waiting to begin the programming sequence', ensure the correct programming procedure is being followed.
Why Xpresskit Extender says that the OBDII feature is not supported?
If the Xpresskit Extender displays 'OBDII feature is not supported', the diagnostic data bus was not detected, therefore the SmartStart features will be limited.
Why Xpresskit Extender shows PTS shutdown error?
If the Xpresskit Extender displays 'PTS shutdown error', the PTS output from the module was not activated due to safety protection.
Why Xpresskit Extender says brake was not detected?
If the Xpresskit Extender displays 'Brake was not detected', the brakes were not detected, which prevents the system from shutting down the vehicle.
Why Xpresskit Extender says smart key was not detected?
If the Xpresskit Extender displays 'Smart key was not detected', the smart key was not detected, which prevents the system from shutting down the vehicle.
Lists vehicles and features compatible with the DBALL2 module.
Detailed wiring information for Mazda models across installation types.
Instructions for programming the module using different methods.
Guide to configuring module features and options.
Guide to interpreting LED indicators and resolving issues.
Details the warranty terms and conditions for the product.
Provides quick guides for vehicle takeover and available commands.
General| Product Type | Data Bus Interface Module |
|---|---|
| Compatibility | Compatible with most vehicles |
| Functions | Remote start, door lock, and security system integration |
| Connections | Data bus connection |
| Firmware Updates | Yes, via USB |
| Display | LED indicators |
| Power Source | Vehicle's electrical system |
| Programming | Programmable via computer or handheld device |
To Next Page
