32
Figure 4-6
4.2.2.4 Enable all channel recording
Highlight ○ below All, you can enable all channel recording.
z All channel schedule record
Please highlight “ALL” after “Schedule”. See
X297H297H297H304HFigure 4-7X.
When system is in schedule recording, all channels will record as you have previously set (Main
menu->Setting->Schedule).
The corresponding indication light in front panel will turn on.
Figure 4-7
z All channel manual record
Please highlight “ALL” after “Manual.” See X298H298H298H305HFigure 4-8X.
When system is in manual recording, all scheduled set up you have set in will be null ((Main
menu->Setting->Schedule)).
You can see indication light in front panel turns on, system begins manual record now.
Figure 4-8
4.2.2.5 Stop all channel recording
Please highlight “ALL” after “Stop”. See X299H299H299H306HFigure 4-9X.
System stops all channel recording no matter what mode you have set in the menu (Main menu-
>Setting->Schedule)
To Next Page
Loading...
