XTS DVR72XX-V - 1 Preset Setup

50
Here you can set the following items:
z Preset
z Tour
z Pattern
z Border
Figure 4-38
In X328H328H328H Figure 4-35X, click page switch button, the interface is shown as in X331H331H331HFigure 4-39.
Here you can activate the following functions:
z Preset
z Tour
z Pattern
z Auto scan
z Auto pan
z Flip
z Reset
z Page switch
Figure 4-39
Note:
z Preset, tour and pattern all need the value to be the control parameter. You can define it as you
require.
z You need to refer to your speed dome user’s manual for Aux definition. In some cases, it can be
used for special process.
z The following setups are usually operated in the
X332H332H332HFigure 4-35,Figure 4-38 and Figure 4-39,X333H333H333
4.9.1Preset Setup
In X335H335H335H X332H332H332HFigure 4-35X, use eight direction arrows to adjust camera to the proper position.
In
X336H336H336H Figure 4-38, click preset button and input preset number. The interface is shown as in X337H337H337HFigure 4-40X.
Now you can add this preset to one tour.