Xylem LOWARA e-SV Series - Page 14

en – Translation of the Original Instructions
14 e-SV series – Additional Installation, Operation and Maintenance Instructions
7
Motor rated power
kW X 10
8
Number of poles
Empty = 2 poles
4 = 4 poles
P = e-SM
9
Frequency
Empty = 50 Hz
6 = 60 Hz
0 = e-SM
10
Phase
Empty = pump only
M = single-phase
T = three-phase
11
Other information
Empty = standard version
Other = see technical catalogue
Models 33, 46, 66, 92, 125SV
Position
number
Description
Notes
1
Rated flow rate
125 = m3/h
2
Series name
SV
3
Motor operation
Empty = standard
H = with Hydrovar®
X = other drivers
4
Number of impeller
8/2A = 8 impellers, 2 of which with a smaller external diameter, type A or
B
5
Standard materials
G = AISI 304/Cast iron, round flanges (PN16/25/40 depending on
model)
N = AISI 316, round flanges (PN16/25/40 depending on model)
P = AISI 316, round flanges (PN 40)
X = custom version
6
Special versions
Empty = standard
L = Low NPSH, round flanges, PN 25 (versions G, N)
H = high temperature 150°C, round flanges, PN 25 (versions G, N)
B = high temperature 180°C, round flanges, PN 25 (version N)
E = passivated and electropolished ( version N)
W = high temperature 150° and low NPSH (versions G, N)
Y = high temperature 180° and low NPSH (version N)
U = passivated, electropolished and low NPSH ( version N)
I = high temperature 150°, passivated and electropolished (version N)
S = high temperature 180°, passivated and electropolished (version N)
A = high temperature 150°, passivated, electropolished and low NPSH
(version N)
D = high temperature 180°, passivated, electropolished and low NPSH
(version N)
X = custom version
7
Motor rated power
kW X 10
8
Number of poles
Empty = 2 poles
4 = 4 poles
9
Frequency
Empty = 50 Hz
6 = 60 Hz
10
Phase
Empty = pump only
M = single-phase
T = three-phase
11
Other information
Empty = standard version
Other = see technical catalogue
EHM_M0006_A_sc
1 2 5 S V 8 / 2
A G
L 5 5
0
4 T
12
1
1
1
1
11
1
3
6
5
1
1
1
4
7
8 9
10