Xylem LOWARA e-SV Series User Manual

en – Translation of the Original Instructions
e-SV series – Additional Installation, Operation and Maintenance Instructions 9
2.2 Unit inspection upon delivery
Inspect the package
1. Check that quantity, descriptions and product codes match the order.
2. Check the packaging for any damage or missing components.
3. In case of immediately detectable damage or missing parts:
- accept the goods with reserve, indicating any findings on the transport document, or
- reject the goods, indicating the reason on the transport document.
In both cases, promptly contact Xylem or the Authorised Distributor from whom the
product was purchased.
Unpacking and inspection of the unit
CAUTION: Cut and abrasion hazard
Always wear personal protective equipment.
1. Remove packing materials from the product.
2. Release the unit by removing the screws and/or cutting the straps, if fitted.
3. Check the unit for integrity and to make sure that there are no missing components.
4. In case of damage or missing components, promptly contact Xylem or the Authorised
Distributor.
2.3 Unit handling
WARNING:
Use cranes, ropes, lifting straps, hooks and clasps that comply with current regulations and that
are suitable for the specific use.
NOTICE:
Make sure that the harnessing does not hit and/or damage the unit.
WARNING:
Lift and handle the
unit slowly to avoid stability issues.
WARNING:
During handling, make sure to avoid injury to people and animals, and/or damage to property.
WARNING:
Do not use eyebolts screwed on the motor for handling the unit.
NOTICE:
The pump is shipped by the Manufacturer with two shims to block the shaft and the impeller
stack; always handle the pump with the shims installed to prevent damage.
Also see Assembly
of the motor on page 19.

Xylem LOWARA e-SV Series Specifications

General

Brand	Xylem
Model	LOWARA e-SV Series
Category	Water Pump
Language	English