Xylem LOWARA e-SV Series - Reducing vibrations; Hydraulic connection

en – Translation of the Original Instructions
22 e-SV series – Additional Installation, Operation and Maintenance Instructions
Model
L1, mm (in)
L2, mm (in)
L3, mm (in)
L4, mm (in)
Ø, mm (in)
Bolt size
1, 3, 5SV
100 (3,94)
180 (7,09)
150 (5,90)
210 (8,27)
13 (0,51)
M12
10,15, 22SV
130 (5,12)
215 (8,46)
185 (7,28)
245 (9,65)
33SV
170 (6,69)
240 (9,45)
220 (8,66)
290 (11,41)
15 (0,59)
M14
46, 66, 92SV
190 (7,48)
265 (10,43)
240 (9,45)
315 (12,40)
125SV
275 (10,82)
380 (14,96)
330 (12,99)
450 (17,72)
19 (0,75)
M18
4.3.5 Reducing vibrations
The engine and the flow of liquids in the piping can generate vibrations, which may be
amplified
from the possible incorrect installation of the unit and the piping. See Hydraulic connection on
page 22.
4.4 Hydraulic connection
DANGER:
All the hydraulic and electrical connections must be completed by a technician possessing the
t
echnical-professional requirements outlined in the current regulations.
WARNING:
Piping must be sized to ensure safety at the maximum operating pressure.
WARNING:
Install appropriate seals between the unit couplings and the pipings.