en – Translation of the Original Instructions
16 e-SV series – Additional Installation, Operation and Maintenance Instructions
3.5 Intended use
• Pressure boosting and water supply systems
• Washing and cleaning sector, including washing of vehicles
• Circulation of hot and cold liquids, for example water or water & glycol, for heating, cooling
and air conditioning systems
• Water treatment applications
• Transfer of moderately aggressive liquids
• Irrigation
• Firefighting systems.
Observe the operating limits in Technical Information on page 40.
Pumped liquids
• Clean
• Chemically and mechanically non aggressive
• Hot water
• Cold water.
3.6 Improper use
WARNING:
The unit was designed and built for the use described in section
Intended use. Any other uses
are prohibited, as they could compromise the safety of the user and the efficiency of the unit
itself.
DANGER:
It is prohibited to use this unit to pump flammable and/or expl
osive liquids.
DANGER: Potentially explosive atmosphere hazard
It is prohibited to start the unit in environments with potentially explosive atmospheres or with
combustible dusts.
Examples of improper use
• Pumping liquids not compatible with the construction materials of the unit
• Pumping hazardous, toxic, explosive, flammable or corrosive liquids
• Pumping drinking liquids other than water, for example wine or milk
• Pumping liquids containing abrasive, solid, or fibrous substances
• Using the unit for flow rates exceeding the flow rate indicated in the data plate.
Examples of improper installation
• Explosive and corrosive atmospheres
• Areas where the air temperature is very high and/or there is poor ventilation
• Outdoor without protection from weather conditions.
To Next Page
Loading...
Need help?
General
