en – Original instructions
53
11 Declarations
Refer to the specific marking declaration found on the product.
11.1 EC Declaration of Conformity (Original)
Xylem Service Italia S.r.l., with headquarters in Via Vittorio Lombardi 14 - 36075 Montecchio
Maggiore VI - Italy, hereby declares that the product:
Pump unit with integrated variable speed drive, with or without pressure transmitter and relative
cable (see rating plate)
fulfils the relevant provisions of the following European Directives
• Machinery 2006/42/EC and subsequent amendments (ANNEX II - natural or legal person
authorised to compile the technical file: Xylem Service Italia S.r.l.)
• Eco-design 2009/125/EC and subsequent amendments, Regulation (EU) no. 547/2012 and
subsequent amendments (water pump) if MEI marked,
and technical standards:
• EN 809:1998+A1:2009, EN 60335-1:2012+A11: 2014+ A13:2017, EN 60335-2-
41:2003+A1:2004 +A2:2010, EN 62233:2008
• EN 61800-9-1:2017, EN 61800-9-2:2017.
Montecchio Maggiore, 28/09/2021
Chairman of the Board of Directors
11.2 EU Declaration of Conformity (No 19)
1. EMC - Apparatus/Product model:
see rating plate
RoHS - Unique identification of the EEE:
HME, VME, SVE, SVIE.
2. Name and address of the manufacturer:
Xylem Service Italia S.r.l.
Via Vittorio Lombardi 14
36075 Montecchio Maggiore VI
Italy.
3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
4. Object of the declaration:
Pump unit with integrated variable speed drive, with or without pressure transmitter and
relative cable (see rating plate).
5. The object of the declaration described above is in conformity with the relevant Union
harmonization legislation:
• 2014/30/EU Directive of 26 February 2014 and subsequent amendments (electromagnetic
compatibility)
• 2011/65/EU Directive of 8 June 2011 and subsequent amendments, including the (EU)
2015/863 Directive (restriction of the use of certain hazardous substances in electrical and
electronic equipment).
6. References to the relevant harmonised standards used or references to the other technical
specifications, in relation to which conformity is declared:
• EN 60730-1:2011, EN 61800-3:2004+ A1:2012 (Category C2), EN 55014-1:2006
+A1:2009+A2:2011, EN 55014-2:1997 +A1:2001+A2:2008, EN 61000-6-2:2005, EN
61000-6-3:2007+A1:2011.
• EN IEC 63000:2018.
7. Notified body: -.
8. Additional information:
To Next Page
Loading...
