Xylem LOWARA e-SVE - E-SVE Pump

en – Original instructions
14
3.2.3 e-SVE pump
Data plate
1. Pump / electric pump unit type
2. Serial number (date+progressive number)
3.
Flow rate range
4.
Minimum head (EN 60335-2-41)
5.
Maximum operating pressure
6.
Rated voltage range
7.
Frequency
8.
Minimum efficiency index
9.
Electric pump unit/ pump part number
10. Mechanical seal material identification code
11. Head range
12.
Motor rated power
13.
Maximum operating liquid temperature (uses as EN
60335-2-41)
14.
Protection class
15.
Current
16.
Electric pump unit absorbed power
17. Maximum operating liquid temperature (uses other
than as EN 60335-2-41)
Identification code
1. Rated flow rate
[22] = m
3
/h
2. Series name
[SV]
3. Motor operation
[E] = e-SM
4. Number of impeller
[02] = 2 impellers
5. Material pump
[F] = Stainless steel AISI 304, round flanges (PN 25)
[T] = Stainless steel AISI 304, oval flanges (PN 16)
[R] = Stainless steel AISI 304, discharge port above suction, round flanges (PN 25)
[N] = Stainless steel AISI 316, round flanges (PN 25)
6. Version
Empty = standard version
7. Motor rated power
kW x 10
8. Number of poles
[P] = e-SM
9. Frequency
[0] = e-SM
10. Phase
Null = pump
[M] = Single-phase pump unit
[T] = Three-phase pump unit
11. Power Supply Voltage
[2] = 1x208-240 V
[4] = 3x380-460 V
[5] = 3x208-240/380-460 V