Xylem LOWARA e-SVE - Page 55

en – Original instructions
55
• EN 60730-1:2011, EN 61800-3:2004+ A1:2012 (Category C2), EN 55014-1:2006
+A1:2009+A2:2011, EN 55014-2: 1997+ A1:2001+A2:2008, EN 61000-6-2:2005, EN
61000-6-3:2007+A1:2011
• EN IEC 63000:2018.
7. Approved body: -.
8. Additional information:
RoHS - Annex III of 2011/65/EU - Applications exempt from the restrictions: lead as a binding
element in steel and copper alloys [6(a), 6(c)], in solders and in electrical/ electronic
components [7(a), 7(c)-I].
Signed for and on behalf of: Xylem Service Italia S.r.l.
Montecchio Maggiore, 28/09/2021
Marco Ferretti
Chairman of the Board of Directors
rev.00
Lowara is a trademark of Xylem Inc. or one of its subsidiaries.