Yaesu FT-950 - SSB;AM MODE TRANSMISSION; Basic Operation

Page 54 FT-950 OPERATING MANUAL
AUDIO PITCH CONTROL
(
SSB MODE
)
The FT-950 permits adjustment of the receiver audio response by shifting the carrier point during SSB operation.
1. Press the
[
MENU
]
button to enter the Menu mode.
2. Rotate the
[
SELECT
]
knob to select Menu item “
065065
065065
065
J3E LSB CARJ3E LSB CAR
J3E LSB CARJ3E LSB CAR
J3E LSB CAR” or “
066 J3E USB CAR066 J3E USB CAR
066 J3E USB CAR066 J3E USB CAR
066 J3E USB CAR”.
ADVICE:
Press the
[
SELECT
]
knob momentarily to toggle the
Menu item display between “Menu Item Number &
Group Name” and “Menu Function”.
3. Rotate the
[
CLAR/VFO-B
]
knob to adjust the receiver
audio response as desired.
4. Press and hold in the
[
MENU
]
button for one second
to save the new setting and exit to normal operation.
[
CLAR/VFO-B
]
Knob
[
MENU
]
Button
[
SELECT
]
Knob
T OOLS FOR C OMFORTABLE AND E FFECTIVE R ECEPTION
MUTE FEATURE
There may be occasions when you want to silence the receiver audio of the FT-950, perhaps to concentrate on another
receiver or telephone call. The Mute feature makes this simple to accomplish.
VFO-A/Memory Mute
Press the
[(
VFO-A
)
RX
]
Indicator/Switch, while receiv-
ing the VFO-A frequency or Memory channel. The FT-
950 will be silenced and the green LED in the
[(
VFO-
A
)
RX
]
Indicator/Switch will blink.
To restore reception, just press the blinking
[(
VFO-A
)
RX
]
Indicator/Switch once more.
VFO-B Mute
While receiving the VFO-B frequency, press the
[(
VFO-
B
)
RX
]
Indicator/Switch. The FT-950 will be silenced and
the green LED in the
[(
VFO-B
)
RX
]
Indicator/Switch will
blink.
To restore reception, just press the blinking
[(
VFO-B
)
RX
]
Indicator/Switch once more.
ADVICE:
If you press the
[
POWER
]
switch momentarily while the
transceiver is turned on, the transceiver’s audio will be
muted for three seconds.
[
VFO-A
(
RX
)]
Button
[
VFO-B
(
RX
)]
Button