Yaesu FTA-310 - Page 61

FTA-310 OperATing MAnuAl
59
Quick Reference
(Cut Here)
Quick Reference Card
Memory Programming Select the desired frequency in the VFO mode, or recall the “Book” Memory channel or Weather channel to be stored in the Main Memory. 1. P r e s s a n d h o l d i n t h e
[
MW
(
SPL-W
)]
key.
2. Rotate the DIAL selector knob
to select the desired memory channel number for storage.
3. Pres s a n d h o ld in the
[
M W
(
SPL-W
)]
key.
4. Rotate the DIAL selector knob to
select any of the character.
5. When the desired first character
appears, Press downward on the VOLUME knob momentarily to move on to the next character.
6. After entering the entire name
(eight characters maximum), press the
[
MW
(
SPL-W
)]
key for
2 seconds to save all data for the channel and exit.
Tag Channels (Memory Display) 1. Press downward on the VOLUME
knob several times to select -MR- mode.
2. Press the
[
( )]
key, then press
the key to change Memory
display.
Mode Selection Press downward on the VOLUME knob to switch the operating mode between the VFO mode, Memory mode, Book mode and WX mode. Lock Function Press the
[
F
]
key, Then press the
[
( )]
key.
YAESU MUSEN CO., LTD.
VOR Navigation 1. Select the VOR station frequency. 2. Press
[
F
]
key, then press
or
key to change ag.
3. Press and hold in the
[ ( )]
key
for 2 seconds, course indicator display to toggle between the small display and the larger display area.
4. Press
[
F
]
key, then press
[
4/CDI
]
key to select CDI mode.