7-15
1
2
3
4
5
6
7
8
9
10
SPECIFICATIONS
WIRE ROUTING DIAGRAM
1. TCI unit #1 lead 5. TCI unit #2
2. TCI unit #1 6. TCI unit #2 lead
3. Plastic locking tie 7. Wire harness
4. Intake manifold
A. Direction of upper surface of the engine.
B. Allowance 2.0 mm (0.08 in) or less
C. Install the lock of the plastic locking tie as shown in the illustration.
D. Projection
E. Fix to fit the projection
F. The wiring of TCI unit #1 is crossed over the wiring of TCI unit #2.
G. Align the wiring along the intake manifold.
To Next Page
Loading...
