7-19
1
2
3
4
5
6
7
8
9
10
SPECIFICATIONS
WIRE ROUTING DIAGRAM
1. Hose clamp 5. Pulsar hose
2. Fuel pump 6. Plastic locking tie
3. Fuel hose 7. Oil pressure switch lead
4. Fuel filer
A. • Install the air filter case cover as shown in the illustration.
• The locking claw should be fixed securely to the groove of the case.
B. Insert the hose until it reaches the end as shown in the illustration.
C. Install white painted portion in the direction shown in the illustration.
D. Pulsar hose installation details
E. Keep the length shown in the illustration to 0–2.0 mm (0–0.008 in) and cut off the end of the plastic lock-
ing tie.
F. The position of the binding area of the plastic locking tie should be on the engine side.
G. Fuel hose installation details
To Next Page
Loading...
