4
4-7
Instrument and control functions
TIP
TIP
1. Instantaneous fuel consumption display
1. Average fuel consumption display
1. Oil change indicator “OIL”
2. Oil change tripmeter
Instantaneous fuel consumption
mode
The instantaneous fuel consumption
display can be set to either “km/L” or
“L/100 km”.
“km/L”: The distance that can be
traveled on 1.0 L of fuel under the
current riding conditions is shown.
“L/100 km”: The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.
To switch between the instantaneous
fuel consumption display settings,
push the “SELECT” button for one
second.
If traveling at speeds under 10 km/h
(6mi/h), “_ _._” is displayed.
Average fuel consumption mode
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either “km/L” or
“L/100km”.
“km/L”: The average distance that
can be traveled on 1.0 L of fuel is
shown.
“L/100 km”: The average amount of
fuel necessary to travel 100 km is
shown.
To switch between the average fuel
consumption display settings, push the
“SELECT” button for one second.
To reset the average fuel consumption,
push the “RESET” button for at least
one second.
After resetting the average fuel
consumption, “_ _._” will be shown until
the vehicle has traveled 0.1 km
(0.06mi).
Oil change tripmeter mode
The oil change tripmeter shows the
distance traveled since it was last reset
(i.e., since the last oil change).
To Next Page
Loading...
