Yamaha RX-A1010 User Manual

En 113
■ Zone Scene Rename
Changes the scene names (for Zone2) displayed on the front display or TV screen.
■ Setup procedure
1
While “Zone2” is selected, press ENTER.
2
Use the cursor keys to select a scene to be renamed and press ENTER.
3
Press ENTER, use the cursor keys to rename, and then press ENTER again.
4
Use the cursor keys to select “OK” and press ENTER.
• To clear the entry, select “CLEAR”.
5
To exit from the menu, press ON SCREEN.
■ Zone Rename
Changes the zone names displayed on the front display or TV screen.
■ Setup procedure
1
Use the cursor keys to select a zone to be renamed and press ENTER.
2
Press ENTER, use the cursor keys to rename, and then press ENTER again.
3
Use the cursor keys to select “OK” and press ENTER.
• To clear the entry, select “CLEAR”.
4
To exit from the menu, press ON SCREEN.

Yamaha RX-A1010 Specifications

General

RMS rated power	1190 W
Audio output channels	7.2 channels
Dynamic power per channel (8 Ohm)	135 W
Power output per channel (1KHz@8 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	110 W
HDMI in	8
Composite video in	5
Digital audio coaxial in	3
Component video (YPbPr/YCbCr) in	4
Number of HDMI outputs	2
Component video (YPbPr/YCbCr) out	1
Speakers connectivity type	-
Ethernet LAN	No
Supported radio bands	AM, FM
Product color	Titanium
Audio decoders	Dolby Digital Plus, Dolby Pro Logic IIx, Dolby TrueHD, DTS-HD Master Audio
Apple docking compatibility	Not supported
Power consumption (standby)	0.3 W

Weight and Dimensions

Depth	432 mm
Width	435 mm
Height	182 mm
Weight	15100 g